Model 75 Tension/Compression Universal Load Cell

High accuracy

Stainless steel

Infinite resolution

Fatigue rated

image of Model 75 Tension/Compression Universal Load Cell

Our SLC75 load cell or force sensor is a device which converts load or force into an electrical signal.
The SLC75 load cell should be mounted on a hard, flat surface. Tension/compression load cells measure the force applied to the centre threads of the load cell.
Care should be taken to ensure that the model SLC75 load sensor is not exposed to load or force in excess of its capability. The range of model SLC75 tension/compression load cell (universal load cell) selected should therefore be appropriate for the maximum force (including transient forces) that can be applied to it.
The SLC75 transducer is a strain gauge type transducer and has a mV output which may require an amplifier. For the SLC75 we can offer a variety of high quality, low noise and high precision strain gauge amplifiers.

Tension/Compression Universal Load Cell

Tension/compression load cells measure the force applied to the centre threads of the load cell.

Connector sold separately

Connector housing	A	B	C
5lbs (22N) to 2000lbs (8.9kN)	21mm	19mm	32mm
3000lbs (13kN) to 150000lbs (667kN)	32mm	38mm	51mm
200000lbs (890kN)	32mm	38mm	?

Type	Range	D1	H	E	PCD	Centre thread
SLC75/000050	50lbs (222N)	76mm	25mm	7.1mm X6	57.2mm	3/8-24 UNF
SLC75/000100	100lbs (445N)	76mm	25mm	7.1mm X6	57.2mm	3/8-24 UNF
SLC75/000250	250lbs (1.1kN)	76mm	25mm	7.1mm X6	57.2mm	3/8-24 UNF
SLC75/000500	500lbs (2.2kN)	76mm	25mm	7.1mm X6	57.2mm	3/8-24 UNF
SLC75/001000	1000lbs (4.4kN)	89mm	25mm	8.6mm X6	66.7mm	1/2-20 UNF
SLC75/002000	2000lbs (8.9kN)	89mm	25mm	8.6mm X6	66.7mm	1/2-20 UNF
SLC75/003000	3000lbs (13kN)	140mm	46mm	10.2mm X8	114.3mm	1-14 UNS
SLC75/004000	4000lbs (18kN)	140mm	46mm	10.2mm X8	114.3mm	1-14 UNS
SLC75/005000	5000lbs (22kN)	140mm	46mm	10.2mm X8	114.3mm	1-14 UNS
SLC75/007500	7500lbs (33kN)	140mm	46mm	10.2mm X8	114.3mm	1-14 UNS
SLC75/010000	10000lbs (44kN)	152mm	46mm	13.5mm X8	123.8mm	1-1/2-12 UN
SLC75/015000	15000lbs (67kN)	152mm	46mm	13.5mm X8	123.8mm	1-1/2-12 UN
SLC75/020000	20000lbs (89kN)	152mm	46mm	13.5mm X8	123.8mm	1-1/2-12 UN
SLC75/030000	30000lbs (133kN)	191mm	51mm	19.8mm X8	152.4mm	2-12 UN
SLC75/050000	50000lbs (222kN)	191mm	51mm	19.8mm X8	152.4mm	2-12 UN
SLC75/075000	75000lbs (334kN)	229mm	64mm	16.8mm X12	196.9mm	2-1/2-12 UN
SLC75/100000	100000lbs (445kN)	229mm	64mm	16.8mm X12	196.9mm	2-1/2-12 UN
SLC75/150000	150000lbs (667kN)	356mm	108mm	26.2mm X12	298.5mm	3-1/2-8 UN
SLC75/200000	200000lbs (890kN)	356mm	108mm	26.2mm X12	298.5mm	3-1/2-8 UN

Specification

Excitation/supply (calibrated)	10Vdc
Output	2mV/V
Bridge resistance	350 Ω
Linearity error	±0.1% F.S.
Hysteresis	±0.1% F.S.
Repeatability	±0.03% F.S.
Temperature coefficient (zero)	±0.004% F.S. /℃
Temperature coefficient (span)	±0.004% rdg /℃
Operating temperature range	-54℃ to 121℃
Compensated temperature range	16℃ to 71℃
Fatigue life (nominal)	100000000
Deflection at full scale	0.15mm maximum
Over-range capacity	100% F.S.
Major construction material	stainless steel (≥125k lbs = carbon steel)
Mating connector	<=2000 lbs = SEN1005 (PT0A-10-6S (or equivalent)) >=3000 lbs = SEN1006 (MS3106A-14S-6S (or equivalent))

Options and accessories

Amplifiers
Panel meter