Model A205 Flush Diaphragm Pressure Transducer

Flush diaphragm

Stainless steel

Infinite resolution

Gauge pressure

image of Model A205 Flush Diaphragm Pressure Transducer

The RDP model SPT-A205 sensor measures the pressure of a compatible fluid or gas.
The SPT-A205 gauge pressure transducer measures with respect to atmospheric pressure.
This transducer has a flush diaphragm so there are no cavities for sediment to collect or for material to solidify.

dimensional drawing of Model A205 Flush Diaphragm Pressure Transducer

Type	Range
SPT-A205/00100	100psi (689kPa)
SPT-A205/00150	150psi (1MPa)
SPT-A205/00200	200psi (1MPa)
SPT-A205/00300	300psi (2MPa)
SPT-A205/00500	500psi (3MPa)
SPT-A205/00750	750psi (5MPa)
SPT-A205/01000	1000psi (7MPa)
SPT-A205/01500	1500psi (10MPa)
SPT-A205/02000	2000psi (14MPa)
SPT-A205/03000	3000psi (21MPa)
SPT-A205/05000	5000psi (34MPa)
SPT-A205/07500	7500psi (52MPa)
SPT-A205/10000	10000psi (69MPa)
SPT-A205/15000	15000psi (103MPa)

AF=19.1mm (HEX)

L1=40mm

TF=14.5mm

Specification

Excitation/supply (calibrated)	5Vdc
Output	2mV/V nominal
Bridge resistance	350 Ω
Gauge type	foil
Linearity error	±0.5
Hysteresis	±0.5% F.S.
Repeatability	±0.1% F.S.
Resolution	infinite
Temperature coefficient (zero)	±0.02% F.S. /℃
Temperature coefficient (span)	±0.04% F.S. /℃
Operating temperature range	-54℃ to 149℃
Compensated temperature range	16℃ to 71℃
Over-range capacity	50% F.S.
Major construction material	17-4PH (stainless steel)
Port material	17-4PH (stainless steel)
Pressure port thread	1/4-18 NPT
Mating connector	SEN1005 (PT0A-10-6S (or equivalent))
Total weight	57g (maximum)

Options and accessories

Amplifiers
Panel meter