Rod-end bearings can be used with captive type transducers where there may be some mis-alignment
They should not be used horizontally if the transducer range is greater than ±100mm (±4''). For ranges larger than this you may wish to consider using our Mounting Block For RDP Transducers Mounting block.
They should not be used horizontally if the transducer range is greater than ±100mm (±4''). For ranges larger than this you may wish to consider using our Mounting Block For RDP Transducers Mounting block.
BRG1000
FEMALE
FEMALE
TA = 11°
Mounting thread=M5x0.8,0.55''
D1 = 0.63''
ID = 0.1963'' to 0.1994''
L = 1.1''
L2 = 0.31''
Maximum radiation dose=800k Rad
Operating temperature range=-29℉ to 219℉
Major construction material=Plated low carbon steel
BRG1001
MALE
MALE
TA = 11°
Mounting thread = M5x0.8,0.79''
D1 = 0.63''
ID = 0.1963'' to 0.1994''
L = 1.3''
L2 = 0.31''
Maximum radiation dose = 800k Rad
Operating temperature range = -29℉ to 219℉
Major construction material = Plated low carbon steel